z0x/blog.z0x.ca
Code Activity Actions

fix(content): replace sda with nvme0n1, general layout edits

Browse source
This commit is contained in:
z0x 2025-05-03 21:40:30 -04:00
parent 7d7ae30940
commit 04f7e92c7d
1 changed files with 14 additions and 15 deletions
Download patch file Download diff file Expand all files Collapse all files

29
src/content/artix-install-guide/index.md vendored
View file

@ -1,7 +1,7 @@
--- ---
title: "Artix Linux install guide" title: Artix Linux install guide
description: "Guide to installing Artix Linux with OpenRC and full disk encryption for UEFI and BIOS systems." description: Guide to installing Artix Linux with OpenRC and full disk encryption for UEFI and BIOS systems
date: "2025-01-07" date: 2025-01-07
--- ---
--- ---
@ -22,14 +22,10 @@ The goal of this guide is to set up a minimal installation of **Artix Linux** wi
## Prepare an installation medium ## Prepare an installation medium
### Windows
Use [Rufus](https://rufus.ie/en)
### Linux ### Linux
1. Insert a USB flash drive into your PC with at least 2 GB of space available on it. 1. Insert a USB flash drive into your PC with at least 2 GB of space available on it.
2. Find the corresponding block device for the flash drive in `/dev` folder. Usually it is `/dev/sdb1`. 2. Find the corresponding block device for the flash drive in `/dev` folder. Usually it is `/dev/sdb1`
3. Write the image to the flash drive (assuming your flash drive is `/dev/sdb1`). 3. Write the image to the flash drive (assuming your flash drive is `/dev/sdb1`).
> [!warning] > [!warning]
@ -40,6 +36,10 @@ Use [Rufus](https://rufus.ie/en)
doas dd bs=4M if=~/Downloads/artix-base-openrc-*-x86_64.iso of=/dev/sdb1 conv=fsync oflag=direct status=progress doas dd bs=4M if=~/Downloads/artix-base-openrc-*-x86_64.iso of=/dev/sdb1 conv=fsync oflag=direct status=progress
``` ```
### Windows
Use [Rufus](https://rufus.ie/en)
--- ---
## Boot the live environment ## Boot the live environment
@ -49,7 +49,7 @@ doas dd bs=4M if=~/Downloads/artix-base-openrc-*-x86_64.iso of=/dev/sdb1 conv=fs
1. Power off your PC. 1. Power off your PC.
2. Insert the flash drive into the computer on which you are installing Artix Linux. 2. Insert the flash drive into the computer on which you are installing Artix Linux.
3. Power on your PC and press your _boot menu_ key. 3. Power on your PC and press your *boot menu* key.
4. Boot the installation medium. 4. Boot the installation medium.
--- ---
@ -431,12 +431,11 @@ chmod -c 0400 /etc/doas.conf
### Check for UEFI support ### Check for UEFI support
> [!tip] > [!tip]
>If you see a bunch of files listed, use EFISTUB. >If you see a bunch of files listed when executing the following command, use EFISTUB.
>If you do not see a bunch of files listed, your system does not support UEFI and you should use GRUB. >If you do not see a bunch of files listed, your system does not support UEFI and you should use GRUB.
>```sh
```sh >ls /sys/firmware/efi/efivars
ls /sys/firmware/efi/efivars >```
```
### EFISTUB ### EFISTUB
@ -460,7 +459,7 @@ efibootmgr -c -d /dev/nvme0n1 -p 1 -l /vmlinuz-linux -L "Artix" -u "cryptdevice=
1. Install grub on your boot partition 1. Install grub on your boot partition
```sh ```sh
pacman -S grub pacman -S grub
grub-install /dev/sda grub-install /dev/nvme0n1
``` ```
2. Get the UUID of your root partition 2. Get the UUID of your root partition