From 04f7e92c7d3999606e7a69d0bd28bc771f137f8d Mon Sep 17 00:00:00 2001
From: z0x <homelab@home.arpa>
Date: Sat, 3 May 2025 21:40:30 -0400
Subject: [PATCH] fix(content): replace sda with nvme0n1, general layout edits

---
 src/content/artix-install-guide/index.md | 29 ++++++++++++------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/src/content/artix-install-guide/index.md b/src/content/artix-install-guide/index.md
index f2d51c0..cf5c7b7 100644
--- a/src/content/artix-install-guide/index.md
+++ b/src/content/artix-install-guide/index.md
@@ -1,7 +1,7 @@
 ---
-title: "Artix Linux install guide"
-description: "Guide to installing Artix Linux with OpenRC and full disk encryption for UEFI and BIOS systems."
-date: "2025-01-07"
+title: Artix Linux install guide
+description: Guide to installing Artix Linux with OpenRC and full disk encryption for UEFI and BIOS systems
+date: 2025-01-07
 ---
 
 ---
@@ -22,14 +22,10 @@ The goal of this guide is to set up a minimal installation of **Artix Linux** wi
 
 ## Prepare an installation medium
 
-### Windows
-
-Use [Rufus](https://rufus.ie/en)
-
 ### Linux
 
 1. Insert a USB flash drive into your PC with at least 2 GB of space available on it.
-2. Find the corresponding block device for the flash drive in `/dev` folder. Usually it is `/dev/sdb1`.
+2. Find the corresponding block device for the flash drive in `/dev` folder. Usually it is `/dev/sdb1`
 3. Write the image to the flash drive (assuming your flash drive is `/dev/sdb1`).
 
 > [!warning]
@@ -40,6 +36,10 @@ Use [Rufus](https://rufus.ie/en)
 doas dd bs=4M if=~/Downloads/artix-base-openrc-*-x86_64.iso of=/dev/sdb1 conv=fsync oflag=direct status=progress
 ```
 
+### Windows
+
+Use [Rufus](https://rufus.ie/en)
+
 ---
 
 ## Boot the live environment
@@ -49,7 +49,7 @@ doas dd bs=4M if=~/Downloads/artix-base-openrc-*-x86_64.iso of=/dev/sdb1 conv=fs
 
 1. Power off your PC.
 2. Insert the flash drive into the computer on which you are installing Artix Linux.
-3. Power on your PC and press your _boot menu_ key. 
+3. Power on your PC and press your *boot menu* key. 
 4. Boot the installation medium.
 
 ---
@@ -431,12 +431,11 @@ chmod -c 0400 /etc/doas.conf
 ### Check for UEFI support
 
 > [!tip]
->If you see a bunch of files listed, use EFISTUB.
+>If you see a bunch of files listed when executing the following command, use EFISTUB.
 >If you do not see a bunch of files listed, your system does not support UEFI and you should use GRUB.
-
-```sh
-ls /sys/firmware/efi/efivars
-```
+>```sh
+>ls /sys/firmware/efi/efivars
+>```
 
 ### EFISTUB
 
@@ -460,7 +459,7 @@ efibootmgr -c -d /dev/nvme0n1 -p 1 -l /vmlinuz-linux -L "Artix" -u "cryptdevice=
 1. Install grub on your boot partition
 ```sh
 pacman -S grub
-grub-install /dev/sda
+grub-install /dev/nvme0n1
 ```
 
 2. Get the UUID of your root partition